Dacor ERV3015 Installation Manual

2, Dacor ERV3015 Installation Specifications ................................................ 6 Planning the Installation ................................................... 6 Planning the Duct Work ................................................... 8 Installation Instructions .....................................…

15, 13 Installing the Downdraft Vent in the Cutout 1. Cut a hole in the cabinet to allow the duct work to pass through to the floor or wall for the planned duct system layout. Use the dimensions on pages 9 and 10 to determine the hole center line locations. If using the 2” x 1…

10, 8 Installation Specifications Installations with ILHSF and REMP series blowers: With ILHSF and REMP blowers, the downdraft vent can be configured to exhaust through the back, the bottom or either side by removing the appropriate exhaust knock-out shown on the facing page. • When connecti…

3, 1 Important Information About Safety Instructions • The Important Safety Instructions and warnings in these instructions are not meant to cover all possible problems and conditions that can occur. Use common sense and caution when installing, maintaining or oper- ating thi…

7, 5 Product Specifications Product Dimensions - ERV36-ER and ERV48-ER 30 1/4" (76.8 cm) to 37 1/4" (94.6 cm) 10" (25.4 cm) 30" (76.2 cm) 18 5/8” (47.3 cm) 5/16” (8 mm) thick stiffener across back 3 3/4" (9.5 cm) 1" (2.5 cm) 28" 3 prong grounded p…

14, 12 Installation Preparation Verify Package Contents 1. Unpack the unit and verify that all required parts have been provided. If any item is missing or damaged, please contact your dealer immediately. Do not install a damaged or incomplete appliance. The customer must report c…