Dan D'Agostino classic stereo Operation & User’s Manual

8, 8 12-volt trigger input/output These 3.5mm jacks allow the amplifier to be turned on or off automatically by a preamp or other device that has a 12-volt trigger output, and also allow the 12-volt trigger output signal to be relayed to other components (such as a second Classic Ste…

5, 5 Package contents If any of the following items are missing, please contact your dealer: 1 Classic Stereo amplifier encased in protective vinyl 2 XLR-to-RCA adapters 1 owner’s manual 1 AC power cord Unpacking the Classic Stereo amplifier The Classic Stereo amplifier weig…

2, 2 Legal notifications Dan D’Agostino Master Audio Systems is a registered trademark of D’Agostino LLC. The information in this owner’s manual is subject to change without notice. Current Version 1.0 of this manual was produced by the Dan D’Agostino LLC engineering,…

12, 12 Specifications Power output 8Ω 300 watts per channel 4Ω 500 watts per channel 2Ω 1,000 watts per channel Power output, bridged 8Ω 1,200 watts per channel Frequency response 0.1 Hz to 100 KHz, -1 dB 20Hz to 20 kHz, ±0 dB Distortion <0.1%, 1 kHz,…

11, Dan D'Agostino classic stereo 11 Sound does not come from one of the channels Follow the steps below in order. If one of these steps succeeds in restoring the sound, stop there and ignore the other steps. 1. Check speaker cable connections for the malfunctioning channel. Reconnect any cables that may have become d…