Dawson Tools DAN120 Operation & User’s Manual

13, 12 DC Current Measurement (mA)  Plug the test leads in to input jacks.  Connect the test lead to the target, red to positive and black to negative terminals.  Read of the scale as described in Reading the Scale. NOTE:  For 5mA Range, use the 0-10 sca…

8, 7 Introduction Overview The DAN120 is a compact analog multimeter featuring large analog scale. Functions include AC/DC voltage, AC/DC current measurement, resistance measurement and battery test. This DAN120 meter is ideal for both profession…

2, Dawson Tools DAN120 1 TABLE OF CONTENTS LIMITED WARRANTY AND LIMITATION OF LIABILITY ..................................................... 3 Out of the Box ............................................. 3 Accessories ................................................. 4 Safety Informati…

6, 5 should be performed only by qualified personnel.  Avoid direct exposure to sunlight to ensure extended life of the Meter.  Do not place Meter in a strong magnetic field; this may cause false readings.  Use only the batteries indicated in the Technical Spec.  …

10, 9 Reading the Scale General Make sure to align the needle with the scale. Resistance (Ohms - Ω) Use the top scale (Green) to read resistance. If the meter is set to X10, multiply the resistance value by 10, and in x1K multiply the resistance value by 1000. …