Crystal Mountain Mogul Operation & User’s Manual

6, R, P & G Series On Cook & Cold and Hot & Cold models the reservoir can be removed easily by following the steps given below. 1. Unplug and approach the cooler from the front (Figure 27) 2. Turn off the water supply via the shut off valve, and disconnect the water supply from th…

3, RECEIVING Inspect the cooler box for any evidence of shipping or handling damage. In case of shipping damage, claims should be filed promptly with the carrier. Please note that the carrier will not accept claims for any damage discovered after the signing for UNINSPECTED GO…

2, Crystal Mountain Mogul 1 2 3 4 5 6 7 1 . POU Cover 2. Reset Button 3. POU Kit 4. Touch Guard® Hot Water Faucet 5. Cold Water Faucet (Room Temperature Water) 6. Cook Water Faucet 7. Drip Tray Parts may not appear exactly as shown …

5, 3. Remove the POU Cover (if installed) (Figure 16) Use the fingertips of both hands to press on the POU Lid Assembly and turn counter clockwise till it is free from the cooler opening. (Figure 17 and Figure 18) Lift off of the cooler, and set aside. Drain the water from the reservoir and hot …

4, 5. Ensure the following when cooler is to be serviced: 5.1 Turn off Hot Tank Switch (Hot & Cold models only) and disconnect power supply cord (Figure 7 and figure 8). 5.2 Turn off the water supply via the shut off valve, and disconnect the water supply from the cooler (Figure 9). 5.3 Us…