CEECO SSW-521-D Service Manual

4, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 4 1.0 INTRODUCTION The practices in this manual provide installation and maintenance information for the CEECO Model SSW-521-D Stainless Steel Wall Telephone. The information in this manual is subject to cha…

14, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 14 10.0 REPAIR AND RETURN INFORMATION 10.1 WARRANTY REPAIR Any device returned requiring warranty service, repair or credit must be accompanied with a "Return Material Authorization" (R…

16, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 16 12.0 DIAGRAM When programming is completed, move the mini jumpers to the OFF position. NOTE: Do not leave the mini jumpers in the ON position; this will decrease battery life. Move the mini jum…

7, CEECO SSW-521-D ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 7 PROGRAMMING CONTINUED 3.7 Enter #19 followed by the desired emergency auto-dial number. This is the number that is automatically dialed when the button on the front of the phone is pressed. The numbe…

8, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 8 4.0 OPERATION To make a call, press the “Emergency” button located on the front of the telephone and wait to hear dial tone. The LED (if provided) will illuminate red at this time and the pre-…

6, ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY 6 PROGRAMMING CONTINUED LOCATION #00: (OPTION TABLE) • Be sure to record your selections here for future reference: #00 0 __ __ 0 0 __ 0 __ 0 __ 1 2 …