Backyard Discovery Patriot II Owner's Manual

37, Step13 Attach M11 Wall Rail to E7 and E6 Tower Legs with 5/16” x 1 ½” Bolt, Lock Washer and Barrel Nut and Lock Washer. Attach M21 Wall Rail to E7 and E3 with 5/16” x 2” Lag Screws and Lock Washers. Attach K1 Wall Rail to E1 and E2 using 5/16” x 1 ½” Bolts, Lock Was…

4, Backyard Discovery Patriot II PAGE 2 OWNER PS-2010 Rev. 10/21/2009 Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The Playcenter is designed to be installed on a level surface by an Adult with an …

8, Play Set Assembly Manual FAQs: 1. Does the area for the playset need to be level? Yes. Backyard Discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground. 2. What size area is re…

7, PAGE 5 Owner’s Manual Play Set OWNER PS-2010 Rev. 10/21/2009 APPENDIX A 11 X3. CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS X3.1 The U.S. Consumer Product Safety Commission (CPSC) estimates that about 100,000 playground equipment-related injuries resulting…

21, 5/16 X 1 1/2" WHA BOLT H100010 DRAWINGS ARE TO SCALE BUT SMALL VARIATIONS ARE NORMAL. 0 1 2 3 4 5 6 7 8 9 MEASURE BOLTS FROM BOTTOM OF HEAD TO BOTTOM OF BOLT 5/16 X 5-3/4" WHA BOLT H100032 H100073 3/8" SPIKE TEE NUT PAGE 19 - HARDWARE 5/16 X 1 1/4" HEX HEAD BOLT H100042…

34, Step 10 On bottom floor attach H3 Floor Joists to G7 Floor Rails using 2 ½” Wood Screws. H3 H3 G7 G7 ITEMS NEEDED 2- H3 Floor Joists HARDWARE NEEDED 8-2 ½” Wood Screws PAGE 32 …