Brionvega rr-226 Installation Instructions Manual

8, Using the radio functions 5 Preliminary operations Turn on the appliance by turning the volume control knob [12] clockwise. The 2 needles [3 and 4] will remain positioned on the last radio stationed tuned in at the time the appli- ance was turned off. The Radio-phonograph has a push-bu…

6, 6 In this position, all the controls of the Radio-3. phonograph can be used and at the same time the increased distance between the two loudspeakers guarantees a good stereo effect. The 2 loudspeakers can also be positioned further 4. from the central body of the Radio-phonograph. …

4, Brionvega rr-226 Carefully read and follow the instructions provided.• Clean the product using only a damp cloth.• Transport the product using the appropriate protective • packaging. Keep the original packaging of the product in case • repairs are required. Do not connect the …

14, Using the audio functions 6 14 Starting the record player Once the arm setting procedure has been carried out, you can start playing a record. To start the record player, follow the procedure below: Position the record on the turntable of the record 1. player using the felt …

18, The product you have purchased contains extracted natural resources that have been used in the manufacturing process. This product may contain substances known to be hazardous to the environment or to human health. To prevent releases of harmful substances into the environment and t…

15, Adjusting the sound The sound level controls are located in the centre of the front panel on the Radio-phonograph rr-226. The following levels can be adjusted by the user: Volume Level [12]1. The listening volume can be increased or decreased using the knob [12]. Rotating the knob …