BRK electronic DS700RF Operation & User’s Manual

6, 6 3. INSTALLATION GUIDE Please consult the Smoke/Heat alarm owner’s manual for details of where and where not to site your Smoke and Heat alarms. WARNING: Wiring should be installed by a qualified electrician in accordance with BS7671. Permanent connection to the fixed wiring…

14, 14 5. TROUBLE SHOOTING For queries on Smoke/Heat alarm related issues refer to the specific owner’s manual. Fault Action When I press the learn in button the amber LED on the base does not flash. Wait for at least 2 minutes to allow the system to respond. If there is no response …

17, BRK electronic DS700RF 17 7. LIMITED GUARANTEE BRK (“the BRK Brands Europe Ltd products”) as distributed by Sprue Safety Products Ltd (“the Distributor”), are guaranteed by the Distributor to be free from defects in materials and workmanship under normal use and service for a period of five years fro…

10, 10 f) Ensure the amber LED on every DS700RF flashes once every three seconds. g) Press the test button on each alarm in the system in turn and ensure 1) the alarm sounds and 2) it links with every other alarm in the system. h) Installation is now complete. NOTE: If all DS700RF bases have be…

12, 12 g) Install the new Smoke/Heat alarm onto the DS700RF as outlined in the alarm owner’s manual (See Fig 2). h) RESTORE MAINS POWER TO ALL ALARMS. Ensure all Smoke/Heat alarms in the system display a green power light and red operating light as per the user’s manuals. i) Pre…