BlackVue DR380-HD Operation & User’s Manual

26, BlackVue DR380-HD 24 BlackVue Software Configuring BlackVue Settings 1. Insert the Micro SD card into your PC. (X See Page 16) 2. Press the button, and the Configuration window will appear. You cannot set configuration if the SD card with the BlackVue Firmware installed is not connected to the PC. …

12, 10 BlackVue Usage Installation 5. Organize the power cable. Use the provided cable clips if necessary. 6. Adjust the position of the BlackVue's camera lens. Install the product in such a way that the BLACKVUE logo in the button section faces slightly lower than …

4, 2 Preparations Before Reading the User's Manual Thank you for purchasing Pittasoft's BlackVue. This product is a video event data recorder (VEDR) for vehicles. X Please read the User's Manual carefully before using the BlackVue. X Pittasoft is planning to supplemen…

35, 33 [ DR380-HD / DR380G-HD / DR400G-HD II ] X Recording Status LED: You can turn on/off LED in the recording status display section. X Button LED: You can turn on/off LED in the button section where appropriate. X Voice Alarm : The BlackVue product plays voice messages du…

9, 7 Preparations BlackVue At a Glance Check the main body of the BlackVue. For more information on the use of each part, refer to the relevant page. Recording Mode LED Microphone Main Body Button (Parking Mode Recording Button) (X See page 12) [DC IN] terminal (X See page 9) Micro SD Card Slot [V…