AVE RT-195- G Operatin Manual

11, 11 option. SP is the standard, and is the default setting for the RT- 195. If you wish to change the speed to EP, first select TAPE SPEED with the (-) or (+) button, then press and release P/S and you will see the setting displayed. (-) or (+) toggles back and forth between settings…

8, AVE RT-195- G 8 Master/Slave This feature allows the use of multiple RT-195's to be used in applications where you need real time continuous recording with out interuption for more than 8 hours. Using 3 RT-195's in this configuration will allow for 24 hour real-time record- ing. Using the RT-195's …

5, 5 RT-195 On-screen Programming The RT-195 can be programmed via the included IR remote con- trol. You will need a video source in and a monitor connected to be able to see the programming menu. To access the programming menu of the RT-195 VCR, Press and hold the STOP button for approx…

2, 2 RT-195 Event Recorder The RT-195 is AVE’s newest addition to our Mobile VCR product line. The RT-195 is a low cost, 12VDC mobile event recorder with interactive on-screen programming. The features of the RT-195 include: •Time and Date •20 character title •Recycle Record •Power-(+…

12, 12 play a 5 line by 20 character text block. Pressing the (-) or (+) buttons over and over will toggle the text block through the 8 levels of gray from white to black and two levels with back- grounds. When you get the gray scale level you want, press and release the P/S button and this wil…

10, 10 Alarm Record Dwell The arrow should be pointing to ALM REC DWELL, which is a feature used in conjunction with the alarm input jack on the rear of the VCR. If you supply the RT-195 a contact closure, the VCR will alarm record for the length of time set in the ALARM RECORD DWELL …