Avtech AVC796 Quick Start Manual

3, -3- 12) AUDIO (SLOW + ZOOM) Press “SLOW” + “ZOOM” to select live or playback sounds of the audio channels. Live audio of the 1st audio channel Playback audio of the 1st audio channel Live audio of the 2nd audio channel Playback audio of the 2nd audio channel Live …

6, -6- Note: There must be at least 8192 images of recorded data for playback to work properly. If not, the device will stop playback. For example, if the IPS is set to 30, the recording time should be at least 273 seconds (8192 images / 30 IPS) for the playback to work properly…

7, Avtech AVC796 -7- 2.5 Upgrade ‧ Firmware / Multilanguage OSD Upgrade Use USB to upgrade firmware or OSD Step 1. Format the USB memory device as FAT 32 format first. Step 2. Get the upgrade files from your distributor, and save the upgrade files in your USB flash device (do not change…

1, 303Z AC798(D)_797_796(D)_795_792_CD541_Quick_V1.2 H.264 Network DVR Quick Start Please read instructions thoroughly before operation and retain it for future reference. For the actual display & operation, please refer to your DVR in hand. …

2, 1. FRONT AND REAR PANELS 1.1 Front Panel 1) LED Indicators HDD is reading or recording. DVR is powered on. An alarm is triggered. Timer recording is on. Under playback status (For 4CH model only). HDD is full (For 16CH / 8CH models only). 2) MENU Press “MENU�…