Suzuki DL1000AL4 Owner's Manual

10, 9 A: Front brake hose B: Throttle cables C: Right switch wiring harness D: Clutch hose E: Left switch wiring harness THROTTLE Install the throttle assembly with two Allen bolts. A: Throttle assembly B: Allen bolt C: Dot mark RIGHT SWITCH Insert the boss of right switch housing into th…

9, 8 HANDLEBARS Loosen the right switch retaining screws and throttle housing retaining bolts. Insert the right switch and throttle assembly onto the handlebars. A: Throttle assembly B: Right switch C: Handlebars Install the handlebars assembly with the two clamps, four bolts and washers. A: Cla…

24, 23 REAR VIEW MIRROR Remove the lock bolt. Turn in the lock nut as far as possible. A: Lock bolt B: Rear view mirror stay C: Lock nut D: Opposite thread Tighten the lock bolt. Install the rear view mirror and tighten lock nuts securely after positioning them properly. Place the rubber boo…

2, Suzuki DL1000AL4 1 PREPARATION WORKSHOP A: Packed vehicle B: Working space SELF PROTECTION  CAUTION Assembling the vehicle in poor working condi- tion can be hazardous. Place the packed vehicle on a level floor where it is clean and spacious.  CAUTION Assembling the vehicle without proper clothes a…

5, 4 Remove the bolts from the crate. A: Bolt Lift the steel frame to separate it from the base of the crate. Carefully remove the various component parts pack- aged around the motorcycle. A: Steel frame B: Crate base  CAUTION Careless steel frame separation can injure a person. Lift the steel…