BigDog Alpha MP Operator's Manual

21, 605046 3-9 REV A have additional sets of blades and change blades twice a day: once in the morning and again at noon. Many problems with incorrect cutting patterns are due to dull blades or blades which have been sharpened incorrectly. Information on sharpening blades is listed in this manual’s m…

13, 605046 3-1 REV A OPERATION Safe Operating Practices This product is capable of amputating hands and feet and throwing objects. Always follow all safety instructions to avoid serious injury or death. Safe Operation  Evaluate the terrain to determine what accessories and attachments are nee…

19, 605046 3-7 REV A immediately. To make a three point turn to the right, move the left steering control lever farther forward from neutral than the right steering control lever and start the turn. Next, pull back on the steering control levers until they are past neutral and the machine starts …

36, REV A 6-2 605046 PRODUCT LITERATURE If you would like to view or print a copy of the product manuals (Operator’s Manual, Parts Manual, or General Service Manual) for these mowers go online to www.bigdogmowers.com and click on the MANUALS button. Contact your local BigDog ® Mower dealer if yo…

18, BigDog Alpha MP REV A 3-6 605046 3. Use chokewhen engine is cold, or if warm engine fails to start within 5 seconds of cranking. Avoid flooding and operate engine without choking as soon as possible. 4. Set throttle at approximately 1/2 open position. 5. Insert key in ignition switch and rotate full clockwise…

17, 605046 3-5 REV A Lights The BigDog ® Alpha MP comes equipped with operating lights mounted in the front mower frame. There is no dedicated “ON/OFF” switch for these lights. These lights come on when the ignition switch is in the “RUN” position and go off when the ignition swit…