ATP Electronics VR82 Double Vision Tandem Owner's Manual

12, 12 after we determine the proper boom and frame settings for you. Let's set the captain's leg length first. If possible, set your Double VISION on a rear wheel type wind trainer. If you don't have access to such a trainer, have the stoker stand behind the captain&ap…

9, 9 every three inches of extension you will have to move the anti-rotate bolt to the next hole rearward. The rear frame is at maximum extension when the anti-rotate bolt is in the last anti-rotate bolt position and the frame will not move backwards. Make sure the anti-rotate bolt is p…

8, 8 Chapter 2: Assembly and Set-up Your VISION dealer should have put your tandem together and set the adjustments for you. We don't recommend riding your VISION at all until the following procedures have been accomplished or checked by a qualified bicycle mechanic. We will review the ass…

10, 10 Step 1. Looking at the front of the seat, with the seat fabric laying on the seat frame, take the thin strap and loop it around the frame cross- piece. Step 2. Loop the strap in front of the small stub tube but behind the strap. Step 3. Loop the strap back around the seat frame crosspiec…

1, ATP Electronics VR82 Double Vision Tandem 1 © Copyright 1997 ATP Inc. All rights reserved. Do not copy without written permission of ATP Inc. Advanced Transportation Products, Inc. 400 Terry Ave. N — Seattle, WA 98109 (206) 467-0231 fax (206) 4670-175 T A N D E M Owner'sManual Models VR82 VR85 DOUBLE 24 Kickstand I hate al…

6, 6 Anatomy of a Stoker's Seat Front D Captain's Captain's Rear Frame Anti-rotate Nuts (Anti-Rotate Bolt goes in one o Stoker's Handgrip Frame Pinch Bolts Rear Idler Rear Frame Rear Derailleur Stoker's Rear Seat Skewer Stoker's Seat Stay Derailleur Cage…