Argox A-2240 Operation & User’s Manual

12, A Series User’s Manual 23 6. Lead the labels through the media guides with the other hand. The media guide can be adjusted centrally to fit with different label widths. Media Guides A Series…

20, Argox A-2240 A Series User’s Manual 39 Configuration and Configuration This section discusses calibration, printing configuration and resetting the printer to factory defaults. Performing Calibration and a Configuration Report 1. Make sure the media is properly loaded and the top cover …

29, A Series User’s Manual 57 9. After driver installation is complete, click "Close". The driver should now be installed. Installed printer Argox A-2240 PPLB A Series User’s Manual 58 Installing the Printer Driver 1. Turn off the …

25, A Series User’s Manual 49 Ethernet Status/Activity Indicators LED Status Description Both Off No Ethernet link detected Speed LED Green LED On: 100 Mbps link Off: l0 Mbps link Link/Activity LED Amber LED On: link up Off: li…

7, A Series User’s Manual 13 Ribbon Pick-up Holder Release Levers Media Hanger Ribbon Supply Holder Thermal Printhead A Series User’s Manual 14 Controls and Indicators The printer’s controls and indicators are shown in the…

11, A Series User’s Manual 21 Loading Media The Amigo Series printers offer three different loading modes: standard, peel-off, or with a cutter. Standard mode allows you to collect each label freely. Peel-off mode peels backing material away from the label as it prin…