Ariens Compact 24 LE Service Manual

5, Ariens Compact 24 LE EN – 4 SAFETY DECALS The safety decals on your machine are visual reminders of the important safety information in this manual. All messages on your unit must be fully understood and carefully followed. Safety decals on the machine are explained below. Always replace missing or damaged safe…

27, EN – 26 BEARING FLANGE REPLACEMENT Remove Bearing Flange NOTICE: Save all hardware for reinstallation. 1. Stop engine, remove key and wait for all moving parts to stop and for hot parts to cool. 2. Disconnect spark plug wire from engine. 3. Place unit in service position. See Service Position on …

30, EN – 29 SCRAPER BLADE REPLACEMENT Remove Scraper Blade NOTICE: Save all hardware for reinstallation. 1. Stop engine, remove key and wait for all moving parts to stop and for hot parts to cool. 2. Disconnect spark plug wire from engine. 3. Slowly tip unit back so it rests on handle…

14, EN – 13 12. Reinstall belt cover and tighten hardware. 13. Reinstall chute rotation rod into chute rotation gear and secure with spring clip. 14. Reinstall cable hanger onto chute rotation rod. 15. Reinstall chute gear cover and secure with tapping screw. 16. Reinstall chute deflector cabl…

18, EN – 17 See Figure 24. 8. Move hex shaft left and remove pinion gear and flat steel washer from hex shaft. 9. Continue moving hex shaft left and remove friction disc. NOTICE: For ease of removal on track models, position friction disc assembly as far left as possible. See Figure 25. …