Armasight NYX-14 Operation And Maintenance Manual

24, 24 3. Remove the lens cap and place it over the housing of the lens. CAUTION: Before removing the objective lens cap, verify that the photoreceiver is not closed. 4. Turn the Power Button ON. After a slight delay, a green glow will appear in the eyepiece of the mon- ocular. 5. Adjust the unit di…

11, 11 2 DESCRIPTION AND DATA 2.1 SYSTEM DESCRIPTION The Armasight Nyx-14 Mini is the smallest, lightest—yet rugged and dependable--night vision multi- use monocular in its class. Weighing approximatel…

17, 17 3 OPERATING INSTRUCTIONS 3.1 INSTALLATION AND MOUNTING CAUTION: To protect the intensier tube when the sight is not in use or when it is being operated in day- light, keep the protective lens cap securely tted over the lens. 3.1.1…

18, 18 5. The goggle kit has a ip-up mechanism. Push the button (D) of the goggle kit bracket and lift the unit up until it reaches its top position. 6. Push the same button (D) to lower the unit into the correct viewing position. Figure 3-2 shows the Nyx-14 Mini in the correct position for t…

30, 30 4.4.2 CLEANING PROCEDURES CAUTION: Thoroughly clean and dry each item before placing them into the storage case. Clean the Nyx-14 Mini as follows: 1. Gentlybrushoanydirtfromtheunit’sbodyusingaclean,softcloth. 2. Moisten the cloth with f…

29, Armasight NYX-14 29 C. Black Spots Black spots are cosmetic blemishes in the image intensier or debris between the lenses. Black spots areacceptableaslongastheydonotinterferewiththeuser’sabilitytoobservethescene.Noaction isrequire…