Ask Proxima A3100 Manual 

16, Ask Proxima A3100 15 Problem Solution Result No start up screen Plug power cord into the projector press power button Correct image Only start up screen appears If your computer is using the projector's DisplayLink connector, see the DisplayLink User's Guide for troubleshooting information. Press the S…

7, 6 Projector and device connector guide The following illustration and table should help you find the connectors to use and obtain the best resolution possible from your input devices, such as computers, standard VCRs, DVD players (progressive and interlaced), HDTV sources (1080i, 1080…

27, 26 Optimizing video images After your video device is connected properly and the image is on the screen, you can optimize the image using the onscreen menus. For general information on using the menus, see page 27. • Adjust the Keystone, Contrast, Brightness, Color, or Tint in the Basic Pictu…

25, 24 Using the keypad buttons Most buttons are described in detail in other sections, but here is an overview of their functions: Power–turns the proj ector on and off (page 10). Auto Image–reset s the projector to the source. Presets–cycles through the availabl e preset settings…

18, 17 Problem Solution Result Image fuzzy or cropped Set your computer’s display resolution to the native resolution of the projector (Start > Settings > Control Panel > Display > Settings tab) Image clear and not cropped Image not centered on screen Move projecto…