Alarm Controls Corporation 600S Installation Instructions Manual

1, SOLID DOOR ALARM CONTROLS CORPORATION 19 BRANDYWINE DRIVE P.O. BOX 280 DEER PARK, NY 11729 800 645-5538 WWW.ALARMCONTROLS.COM MAGNETIC LOCK INSTALLATION INSTRUCTIONS ALARM CONTROLS CORPORATION OFFERS A COMPLETE LINE OF MAGNETIC LOCKS AND ACCESSORY ITEMS TO ASSIST THE INSTALLE…

2, INSWINGING DOOR INSTALLATION WITH L- Z BRACKET STEP 1 FASTEN THE L BRACKET ON THE DOOR FRAME IN A SUITABLE LOCATION. MOUNT THE MAGNETIC LOCK TO THE L BRACKET. MAKE SURE THAT THE MAGNETIC LOCK DOES NOT OBSTRUCT THE CLOSING OF THE DOOR. CONNECT THE CORRECT VOLTAGE TO THE MAGNET. ST…

3, MAGNETIC LOCK L / Z BRACKETS FOR INSWINGING DOORS MAGNETIC LOCK CARE AND MAINTENANCE TYPICAL MAGNETIC LOCK WIRING MAGNETIC LOCK ELECTRICAL SPECIFICATIONS AM2370 FOR 300 POUND MAGNETIC LOCK AM3370 FOR ALL 600 POUND MODELS OF SINGLE MAGNETIC LOCKS AM6370 FOR ALL 1200 POUND MODELS OF SIN…

4, Alarm Controls Corporation 600S WIRE GAUGE CHART TROUBLE SHOOTING GUIDE 50 FEET 100 FEET 150 FEET 200 FEET 300 FEET 400 FEET 500 FEET 750 FEET 1000 FEET 200 MA. 300 MA. 400 MA. 600 MA. 800 MA. 1 AMP. DISTANCE FROM POWER SUPPLY TO MAGNETIC LOCK D C C U R R E N T 24 GA. 24 GA. 22 GA. 22 GA. 22 GA. 20 GA. 22 GA. 22 GA. 22 GA. 20…

5, FOLD FORWARD ON DOTTED LINE PLACE AGAINST HEADER MOUNTING INSTRUCTIONS PLACE AGAINST DOOR DRILL 1/4” DIA. HOLE THRU DOOR FOLLOW WITH 1/2” DIAMETER DRILL DRILL 1/4” DIA. ANTI-ROTATION PIN HOLES 3/4” DEEP DO NOT DRILL THRU DOOR MODEL 600 SERIES SINGLE DRILL TEMPLATE ALARM CONTROLS …

6, MAGNETIC LOCK WIRING INSTRUCTIONS MODELS 600S, 600L, 600D, 1200S, 1200L To remove the header plate, it may be necessary to remove the wiring compartment screw. A long wiring compartment screw can be used to increase security by limiting access to the header plate mounting screw from below …