Alvarion BreezeACCESS II System Manual

197, Menus and Parameters 2-67 BreezeACCESS Version 4.5 System Manual receive circuit is equivalent to reducing the level of the received signal (including both signal and noise) by 2 dB when selecting 10 dB attenuation and 12 dB when selecting 25 dB attenuation. The default is 0 dB. ! ACSE Param…

62, 1-14 BreezeACCESS Version 4.5 Installation Manual Revision: 1.0 The SU-NI/AU-NI provides the following interfaces: ! An Ethernet connector (marked ETH) for connecting the unit to the network. See Table 1-1‚ page 1-4 for information on the required type of Ethernet cable. ! An IF connecto…

180, 2-50 BreezeACCESS Version 4.5 Operations and Administration Manual Revision: 1.0 Max. Hopping Sequence (Shift) (channels) = Number of hopping frequencies-1. The actual hopping sequences depend on the method used for defining the basic hopping sequence: Standard Scrambling, Enhanced Scram…

173, Menus and Parameters 2-43 BreezeACCESS Version 4.5 System Manual 1. The first channel in the basic scrambled sequence is frequency 1. Frequency 1 (index=1) is the lowest frequency in the list of frequencies to be used, frequency 2 is the next frequency and so on.) 2. The index…

97, Alvarion BreezeACCESS II Setting Basic Parameters 1-3 BreezeACCESS Version 4.5 System Manual Figure 1-1: Main Menu – Administrator Access Rights (SU and AU) The appearance of the Main Menu varies in accordance with the set access level. ! For users with Read Only access rights, only the Info Screens opti…