POSIFLEX PD – 201 Operation & User’s Manual

1, Part 1 FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested an found to comply with limits …

2, Part 2 BRIEF INTRODUCTION THE PRODUCT The PD-201 is a low profile customer display option designed for Posiflex DT-20X POS terminals. It is delivered in separate carton for the host system and shall be installed per instructions in the DT system user’s manual. FEATURES …

3, Part 3 INSTALLATION GUIDES HOST SYSTEM PREPARAION For serial interface (RS232) PD-201 to be used in DT-20X series, you have to adjust during power off the internal jumper of the host system to supply 5 V DC to the COM port selected for the serial interface customer display. This a…

4, Part 4 USING THE CUSTOMER DISPLAY COM PORT SELECTION This series of customer display is designed to serve in Posiflex POS systems with RS232 interface. It is advisable to well study the I/O port availability of the host system before determining which COM port to be used. …

5, Part 5 SPECIFICATIONS OPTICAL Number of digits 16 digits/row, 1 row Dot matrix 5 X 7 dots Digit height 8.07 mm Digit width 4.85 mm Display type STN positive transflective LCD Display color Yellow Green 260 cd/m 2 7.6:1 MECHANICAL Height 51.7 mm Width 138.9 mm Depth 44…

6, POSIFLEX PD – 201 Part 6 COMMAND LIST EPSON COMMAND MODE (POWER ON DEFAULT MODE): NAME HEX CODES FUNCTION BS <08> Move cursor left HT <09> Move cursor right HOM <0B> Move cursor to home position CLR <0C> Clear display screen CR <0D> Move …