Amcrest QCcam IP3M952E Quick Start Manual

6, 5 3. Individual Camera Setup 1. Ensure that the camera is connected to an NVR or a router that is on the same network as your PC. 2. Install the software “smartClient” from the included CD, and after installation, run the program. The software icon on your desktop looks lik…

7, 6 4. NVR Camera Setup • After you’ve connected the camera to your NVR, the camera will be automatically detected and assigned an IP address when you turn on your NVR. If the camera is not detected, check that the Ethernet cable is inserted correctly. • Provide…

3, 2 2. Setup Hardware To setup the camera, connect it to the NVR as follows: 1. Connect the Ethernet cable to a port on the back of the NVR. 2. Connect the camera cable to an Ethernet cable. …

4, Amcrest QCcam IP3M952E 3 Hardware Setup Guidelines • The internal components of the camera can be damaged by prolonged exposure to direct sunlight. Do not point the camera directly at the sun. • The camera produces great images when it’s in the shade looking at subjects that are well lit. Do not …

5, 4 • Never place strain of any kind on the network cable connection. It’s designed to clip into place to prevent slippage, but it won’t support any weight and can be easily broken by a sharp tug. Exercise caution. • Ensure that cables are sheltered from moisture, weather and s…