AOpen XC Cube TZ915 Operation & User’s Manual

25, AOpen XC Cube TZ915 25 2.8.6 Install CPU on Socket 939 1 Erect CPU socket lever up and gently put CPU onto Socket 2 Press lever back to CPU socket, and then it’s done. TZ65II_915-OL-E0501A[49.BZ101.0A1].indd 2005/2/17, 下午 10:3525 …

27, 27 2.11 Insert AGP card or PCI card to motherboard If you happen to have AGP / PCI Express x16 or PCI card, you may insert them onto the slot as shown. Screw the iron plate off the back panel, and use the screwdriver to pry it out. 1 After that, please plug in the AGP / PCI Ex…

29, 29 2.15 Set proper voltage and connect power supply cable The voltage supplied by power outlet differs from countries or areas you dwell in. If the outlet is supplied by 110V, please set the switch to 115V. If the outlet is supplied by 220V, please set the switch to 230V. Connec…

22, 22 2.8.3 Install CPU on Socket 479 1 Remove plastic membrane from CPU socket and make sure the drop-shaped indicator on socket screw aims at open direction (the default is open). Plastic membrane Socket screw Drop-shaped indicator Match socket Pin 1 and golden arrow, and gently put CPU onto…

10, 10 2.1 Features of XC Cube AOpen XC Cube, designed as a Mini-PC, provides you as many advantages as it can. You may nd that it is elegant among other traditional PC design that obviously highlighted your individual style and taste with different color panel provided. In addi…

17, 17 2.6 Install Optical drive 4 You can connect the other side of the Floppy disk 34pin cable and Floppy hander of the Motherboard. Please pay attention to the red cable should aline with the Floppy disk and pin 1 of the Motherboard. If you install the Card reader, you can c…