APart-Audio SDQ5Pir Manual 

5, [email protected] 5 Conguration Settings: SELECT is input source selection, a possible command could look like this: “Set select AB<CR>”. In this case, both inputs A and B will be mixed together by the SDQ5Pir unit. Possible values are A, B, AB or WI. WI is the local input…

9, [email protected] 9 ir Commands SDQ5Pir device code is “807F” Infrared commands have been coded according to the NEC® protocol Function ir COMMAND Power ON 12 Power STANDBY 1A Input A 01 Input B 04 Input A + B 07 Input WALL 0A Level UP 03 Level Down 06 MUTE 09 Bass UP 0C Bass DOWN 00 Tr…

6, APart-Audio SDQ5Pir WWW.APART-AUDIO.COM 6 Restore Factory Settings: The factory defaults are shown in the RS232 commands table. In order to restore the factory default settings, enter the following command: SET RESTORE ON<CR> This function can also be executed without using RS232 commands. In that cas…

12, WWW.APART-AUDIO.COM 12 Company names, product names, and names of formats etc. are the trademarks or registered trademarks of their respective owners. © 2009 APart-Audio specifications subject to change without notice. …

2, WWW.APART-AUDIO.COM 2 Features The APart SDQ5Pir powered loudspeaker set is a versatile and very compact, easy to use, plug and play sound system. It consists of an amplied loudspeaker with a 5.25” woofer, a high frequency unit and a second linkable passive loudspeaker, powered by the sec…