Poly Evolver Operation Manual

7, Poly Evolver 7 To select Combo mode, press the C OMBO switch. Combos give you complete flexibility configuring the four voices; you can stack or split the keyboard, assign different Programs to different MIDI channels, set it to play multiple different sequences synchronously, and so on. There are 3 b…

57, 57 Program Data Dump Status Description 1111 0000 System Exclusive (SysEx) 0000 0001 DSI ID 0010 0000 Evolver ID 0000 0001 File Version 0000 0010 Program Data 0000 00vv Bank Number, 0 - 3 0vvv vvvv Program Number, 0 - 127 0vvv vvvv 220 bytes in “packed MS bit” format (see page 60). Includes …

19, 19 with Poly Chain) MidInNoS/S MIDI clock is received, but MIDI start/stop/continue messages are ignored. Prog Tempo: Off, On – When set to Off, changing a Program or Combo will not change the tempo- this is useful for keeping a constant tempo but using different sounds. If set to On, a…

52, 52 Transmitted Channel Messages Status Second Third Description 1000 nnnn 0kkkkkkk 0000000 Note Off. 1001 nnnn 0kkkkkkk 0vvvvvvv Note On. 1011 nnnn 0vvvvvvv 0vvvvvvv Control Change; see “Received Controller Messages” table following 1100 nnnn 0ppppppp Program change, 0 – 127 for Programs 1 �…

15, 15 To edit the Combo parameters, first hit the desired C OMBO P ART Switch. The P ARAM 1 knob now selects the parameter, and the P ARAM 2 knob changes the value. The + and – switches will increment/decrement the value also. See the Combo Parameters section for a detailed list of all paramete…