Ag Leader Integra Display Operator's Manual

160, 144 Firmware Version 6.0 To return to the previous screen, press the Back icon. Press the Back icon from the AutoSteer Setup screen to return to your Display menus. VEHICLE Press: Vehicle button Select the desired vehicle configuration procedure button: create and calibrate a new ve…

105, 89 Ag Leader PN 4002083 Rev. N S ETUP V IRTUAL T ERMINAL SETUP VIRTUAL TERMINAL The display is compatible with the ISO 11783 (ISOBUS) Virtual Terminal Standard. This enables support of many ISOBUS compliant implements on the display. Virtual Terminal functionality enables the compliant im…

328, 312 Firmware Version 6.0 MAP SCREEN (A) Single Rate control display for all containers in a sequence. Container level indicator displays the combined total for all containers in the sequence. (B) Manage individual container level edits for all containers when using container sequencing (…

201, Ag Leader Integra Display 185 Ag Leader PN 4002083 Rev. N P LANTING R ATE C ONTROL b. From the Run screen, open the product application rate window, and highlight the appropriate product. Select Manual control mode. c. Switch the Master Switch on. d. Press the up button one time. Now press the down button one time. If t…

236, 220 Firmware Version 6.0 Error Message: “(Row #) mux bus data line short to mux bus ground”. Possible Cause: Population sensor’s mux bus signal wire is shorted to ground. Solution: Press OK to dismiss the error. The display then replaces the message window with an alarm text on the he…

242, 226 Firmware Version 6.0 Implement Offsets screen appears, with each channel’s settings shown on its own tab. Defaults to the value entered during Configuration Wizard Boom sections can independently be offset forward or back (application only) Press to access Swath Section Offsets scree…