Acrosser Technology AR-B5630 Operation & User’s Manual

12, Revision: 2.01 12 2.2 Connector and Jumper Setting Table 1. PWR2: External +12V DC power input connector. 2. CON2: ATX function connector. 3. CON3: Extra +12V and +5V DC power output connector (for SATA device). PIN SETTING 1 GND 2 GND 3 +12V 4 +12V PIN …

5, Acrosser Technology AR-B5630 Revision: 2.01 5 1 INTRODUCTION Welcome to the AR-B5630 ECIP AT/ATX Single Board Computer. The AR-B5630 is EPIC board with Socket P Intel Core™2 Duo or Core Duo or Core Solo and Celeron M processor and Intel GM965 + ICH8M Chipset. The memory contents one DDR2 SO-DIMM soc…

20, Revision: 2.01 20 3.1 Main Setup The <Main Setup> choice allows you to record some basic hardware configuration in your computer system and set the system clock and error handling. If the motherboard is already installed in a working system, you will not need to s…

24, Revision: 2.01 24 3.5 Peripherals Setup This option controls the configuration of the board’s chipset. Control keys for this screen are the same as for the previous screen. Option Choice Description Onboard Serial Port 1 Onboard Serial Port 2 Onboard Serial Port …

22, Revision: 2.01 22 3.3 Power Setup Use this main to specify your setting for power management. Option Choice Description ACPI Function Enabled Disabled Enable this function to support ACPI (Advance Configuration and Power Interface). ACPI Suspend Type S1 (POS)…

3, Revision: 2.01 3 Copyright 2010 All Rights Reserved. Manual’s first edition: June 30, 2010 For the purpose of improving reliability, design and function, the information in this document is subject to change without prior notice and does not represent a commitme…