AdvanceTec AT6549A Operation & User’s Manual

12, 12 AT7107A – Handset with Cradle 2. An active call can be terminated and an incoming call can be rejected by pressing the PTT button on the …

11, AdvanceTec AT6549A 11 A confirmation tone that the call has been answered will be heard through the speaker NOTE! If the PTT button is pressed for more than 2 seconds it will reject and end the call. 2. To make a hands‐free telephone call, place the phone into the cradle and dial…

5, 5 2. The Speaker should be located more than four feet from the junction box. 3. The Speaker includes a mounting bracket, permitting it to be mounted in a variety of ways. Loosen the thumbscrews on the side of the speaker and using the mounting bracket as a temp…

2, 2 Index Page Details 1………………………… Part Number 3………………………... Important PHONE Settings 3………………………… Changing Phone Contact Plate 4………………………… Warnings 4 – 5…………………… Speaker In stallati…

4, 4 Hands‐free Installation Before beginning the installation process, determine the best locations for the mounting of the Mounting Bracket, Hand‐free Cradle, Push‐To‐Talk (PTT) button, Visor Microphone, Speaker and Junction Box. Consider the following guidelines wh…