Advocate Redi-Code+ BMB-EA001 Operation & User’s Manual

15, mg/dL = Milligrams per deciliter (USA) mmol/L = Millimoles per liter (Canada & much of the rest of the world) Meter Setup: Unit of Measurement Step 14: With the mg/dL (mg/dL is the default setting) ashing, press and release the “M” button to change to mmol/L. Step 15:…

27, Many factors will affect blood glucose values such as food intake, medication dosages, health, stress, or exercise. The expected blood glucose values appropriate for you should be consulted and determined by your healthcare professional. • References 3. American Diabetes Association (2010).…

8, Notes: • Batteries should be replaced when your meter power is getting low indicated by displaying battery symbol, or the meter briey shows “E-2” with battery symbol. • After replacing new batteries, the display check will appear briey. That means the batteries are install…

35, Step 1: Put on disposable protective gloves and take disinfectant towelette from the container. Step 2: Wipe down the body of the meter and lancing device, including the clear cap used for alternate site testing, until the debris or the bioburden is removed. After air-drying, go to the disinf…

40, Advocate Redi-Code+ BMB-EA001 Message What it means What to do Operating temperature is out of range. Move to an area between 50°F and 104°F, let the meter adjust to this temperature for 20 minutes before performing a test. No results are stored in the meter’s memory. No action is required. No average r…

32, Your System Maintenance Cleaning and Disinfection The risk of disease transmission, such as viral hepatitis, from shared use of blood glucose meter and lancing device has been increasingly reported by the FDA and CDC*1,2. To minimize the biohazard risk the cleaning and disinfection procedure sh…