Sound Choice Pro Audio DPA-260A Operation & User’s Manual

3, MENU “UTILITY MENU” [Access by pushing the “UTILITY” button] NAV/PAR1 Encoder PM2 or PM3 Encoder [to navigate between menus] [to chose option, then ENTER to load it; (*) indicates the selected option] 1 UTILITY MENU:...... << System Utilities >> 1.1 SYSTE…

22, ● Menu “Output 1/2/3/4/5/6” Output Channels Editing [access by pushing the “1/2/3/4/5/6” buttons] From the “Default Screen”, it is possible to access the “Output Channel” menu by pressing the “1” or “2” or “3” or “4” or “5” or “6” button. Once pressed, the…

19, EQ: [x] sub-menu – from this sub-menu it is possible to set the Input Channels five available Parametric or Shelving Filters. The DPA-260A allows the user to select either Bell or Shelving Parameters and assign them independently using the 5 available filters. In order to select the…

10, – Delay Time/Distance: this page allows you to select the measurement unit to be used for the Delays: Time (in milliseconds “ms”) or Distance (in meters “m”): By pressing ENTER and rotating the “PM2” or “PM3” encoder, it is possible to select the measurement unit to be used fo…

32, Sound Choice Pro Audio DPA-260A ● RS232/RS485 Remote Control protocol for Presets Changing and Gain/Volume controls The following is the HEX Code for controlling the DPA-260A recall presets and master volume control: Preset Changing: CMD_RECALL_PRESET: CMD=1BH A. The User has to send the following Command, including…