BOXLIGHT CD-454m Operation & User’s Manual

7, iii SAFETY INSTRUCTIONS Please read and follow all safety instructions provided BEFORE using your new projector. Failure to comply with safety instruc- tions may result in fire, electrical shock, or personal injury and may damage or impair protection provided by equipment. Please save al…

35, 27 Controls Menu FIGURE 17 Controls menu Video Standard NOTE: If you already know the video standard used in your geo- graphical area, it’s often best to manually select it. When Video standard is set to Auto, the projector attempts to pick the video standard (NTSC, NTSC 4.43, PAL, PAL-…

41, BOXLIGHT CD-454m 33 MAINTENANCE & TROUBLESHOOTING This section describes how to: • clean the lens • replace the projection lamp • replace the batteries in the remote • use the security lock feature • troubleshoot the projector Cleaning the Lens Follow these steps to clean the projection lens: …

2, FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.…

15, 7 SETTING UP THE PROJECTOR 1 Place the projector on a flat surface. • The projector must be within 10 feet (3 m) of your power source and within 6 feet (1.8 m) of your computer. • If you want to project from behind a translucent screen, set up the projector behind your screen. See “Rear Pro…