HYCON HPP18E Operating Manual

4, 3 Technical Data Hydraulics The HYCON HPP18E open centre hydraulic powerpack is designed in accordance with the EHTMA categories D and E, which prescribe a performance of minimum 30 l.p.m. or 40 l.p.m. at 138 bar. The HYCON powerpack is fully compatible with and suffic…

7, HYCON HPP18E 6 Starting Instructions Please observe the starting instructions on the electric box. Start: • •• • Check hydraulic oil level at sight glass • Connect hoses and tool • Press the green button • If the powerpack does not start, invert the phases i…

2, 1 Contents Page Safety precautions ................................................................................................ 2 Filling up hydraulic oil ........................................................................................... 2 Technical data ....…

9, 8 Service, Maintenance and Hydraulic Settings Service/Maintenance Daily Weekly Yearly Hydraulic oil Check 1 x replacement Hydraulic oil filter *) 1 x replacement Check hoses (tighten up if needed) *) Use only filters with by-pass Hydraulic Settings Chec…

8, 7 Short Circuit If the motor stops due to a short circuit (water), malfunctioning etc., the fuse in the relay might need to be reset. 1. Open the electrical box 2. Open the clear doors on the relays (Q34 and Q35) 3. Push the blue fuses to reset the relays (see picture) …