Suunto M-9 Manual 

29, 29 Set the TAD measurement for the starboard tack: 1. Press ENTER to store the tack heading. 2. Select STB Tack from the menu list. 3. Press ENTER to confirm the setting. At the turn buoys: 1. Press ENTER to store the location. 2. Select the correct turn buoy from the menu list. 3. Pre…

5, 5 If you wish to view the distance to the destination do the following: 1. Scroll to Sailing mode and press START/DATA – a sailing data list is displayed 2. Press arrow down to scroll to dtw (distance to waypoint) 3. Press ENTER to confirm selection – You return to the Sailing mod…

42, USER PERMIT AND PIN CODE When purchasing ARCS charts you must have your user permit and PIN code available in order to register for the use of the chart. The user permit and PIN code is provided in the Suunto M9 sales package. …

11, 11 The accuracy also improves with the number of measurements made on the same spot, as some errors will be averaged out. Under all-in-view satellite conditions a global average horizontal positioning error is 7.8 meters (95% confidence level). However, depending on the satellite …

38, 38 DISCLAIMERS GPS SYSTEM Since the GPS satellites and delivery system are neither owned nor maintained by Suunto Oy, Suunto Oy takes no responsibility of possible malfunctions, changes in positioning quality or discontinuity of the GPS service in the future. Suunto will not reclaim p…