SWIT S-1221H Operation & User’s Manual

6, Rear view Battery plate Install: V-mount or Gold mount battery plates install position, with a hole to connect the battery plate power wires to the main board inside. DC IN 11V-17V BACK UP: Connect with 4-pin XLR power adaptor (Pin 1: Negative, Pin 4: Positive) DC IN 11V-17V MAIN: Connec…

5, 2. Panel Instruction Front view Speaker: For SDI/HDMI embedded audio and analog audio monitoring. (Will not work if earphone is plugged in) SDI1: Press “SDI1” to switch to SDI input 1 SDI2: Press “SDI2” to switch to SD…

3, Maintenance  The Monitor 1. Please keep the signal terminals and the cooling vent away from knife-edge, metal or liquid in order to avoid short-circuit and damage. 2. Please don't try to disassemble any parts of the monitor by yourself, which would …

4, 1. Features Full-HD 21.5” LCD Panel 1920×1080 resolution, 1000:1 contrast Multiple inputs 3G/HD/SD-SDI, HDMI and Composite input Loop through outputs SDI, HDMI has loop through output SDI 1080psf supported Support SMPTE-RP211 format: 1080psf (30 / 29.97 / 25 / 24 …

7, SWIT S-1221H 3. Menu Operation Press “MENU” and it will display menu system Revolve “ENTER” to select an item. The selected item will be highlighted display. Press “ENTER” to enter the selected item. Under menu system, press “MENU” to back to previous menu. *The …

8, 3.5 DISPLAY submenu The DISPLAY submenu is to select the items to be displayed on screen when ‘DISPLAY” button is pressed. Revolve "ENTER" to turn on/off the items: INFO: Including Input format, aspect ratio, underscan/overscan, zoom status TITLE: User edited title MAR…