B&D Controll-A-Door R Instruction Manual

26, 9. Subject to paragraph 12 hereof; (i) the obligations of B&D under this warranty are limited to those contained herein and such warranties are expressly in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular pu…

2, START BY READING THESE IMPORTANT SAFETY RULES These safety alert symbols mean Caution – a personal safety or property damage instruction. Read these instructions carefully. This Automatic Garage Door Opener is designed and tested to offer safe service provided it is installed an…

23, B&D Controll-A-Door R SECTION 7 – DIAGNOSTIC CODES Slow flashing of the Green Power LED on the front panel indicates the opener is in vacation Mode – see Section 4. If the Service LED is on it indicates the door is overdue for service, if the Service LED is flashing it indicates that there may be a pr…

22, 22 ©Copyright 2003 Part No 059778 SECTION 6 – SAVE A SERVICE CALL If You Need a Service Call If the operator needs service please call the dealer who installed the operator (for product assistance contact 1800 636 407 within Australia). Before calling for service you should have the following i…

4, WHAT YOU MAY NEED TO DO THE JOB ❐ Suitable door support ❐ Ladder ❐ Phillips screwdriver ❐ Suitable sockets and handle with a 150mm extension ❐ 450mm pipe wrench (Stillson) or similar ❐ Adjustable wrench or spanner set ❐ Marking pencil ❐ Tape measure ❐ Drill ❐ 4.5m…