3DR IRIS-M Pro Operation Manual

3, 01 Thank you for purchasing IRIS-M Pro . IRIS-M Pro is a professional aerial survey platform powered by 3DR autonomous technology and DroneDeploy mapping software. Please read this manual carefully before your first flight and pay close attention to safety information. Happy flying! Meet…

20, 18 land at the launch point Set the RTL switch to ON to end your flight and return IRIS-M to the launch point automatically. Ensure that the RTL switch is set to OFF before takeoff. RTL returns IRIS-M to the location where IRIS-M was armed. Always arm IRIS-M in a safe, unobstruc…

2, Contents 01 Meet IRIS-M 03 Parts 04 Charging the Battery 05 Battery Safety 06 Attaching Propellers 07 Camera Operation 07 DroneDeploy Account Setup 08 Safety 10 Quickstart: 1-Click Map 12 Learning More about DroneDeploy 13 Manual Flight 16 Modes 18 Return to Launch 18 C…

23, 21 Do not handle IRIS-M while the safety button is solid red and IRIS-M is live. Always press the button until it displays blinking red before approaching the propellers. Autopilot ready, GPS locked Acquiring GPS, please wait. Initializing, hold IRIS-M still, please wait. 4 Press …

9, 07 Camera Operation To power on the camera, press and hold the power button on the front of the camera until it triple- beeps, flashes red and displays the startup screen. To enable the camera’s WiFi, hold the button with the wrench icon on the side of the camera until the WiFi icon appea…

27, 3DR IRIS-M Pro 25 Specifications Autopilot: Pixhawk v2.4.5 Firmware: ArduCopter 3.2 GPS: 3DR uBlox GPS with Compass (LEA-6H module, 5 Hz update) Telemetry radio: 3DR Radio Telemetry v2 (915 mHz or 433 mHz) Motors: 950 kV Frame type: V Propellers: 9.5 x 4.5 T-Motor multirotor self-t…