Foscam FI8908 Operation & User’s Manual

30, WWW.FOSCAM.COM FI8908/FI8908W User Manual 3.8 UPnP Settings Choose Using UPnP to MAP Port and then click Submit. Figure 3.17 Here the software inside the camera for UPnP only contains port forwarding now. It also has much relation with securit…

36, Foscam FI8908 WWW.FOSCAM.COM FI8908/FI8908W User Manual Figure 3.30 NOTE: After you upgrade the system firmware, you will not view the camera in browser before you upgrade Web UI. Make sure IP camera tool on your computer could find your camera’…

11, WWW.FOSCAM.COM FI8908/FI8908W User Manual Figure 2.5 IP Address: Fill in the IP address assigned and make sure it is in the same subnet as your computer or router. (I.e. the first three sections are the same) Subnet Mask: The defau…

41, WWW.FOSCAM.COM FI8908/FI8908W User Manual ShenZhen Foscam Intelligent Technology Co., Ltd Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 39 4.1.9 I can’t find multi-device settings and record icon Record and multi-device function are controlled …

9, WWW.FOSCAM.COM FI8908/FI8908W User Manual NOTE: If you could not find the camera’s IP on the IP camera tool. Please check if DHCP is enabled in your router, or disable MAC address filter. Make sure that firewall doesn’t block the came…

13, WWW.FOSCAM.COM FI8908/FI8908W User Manual Figure 2.8 The default user is admin, no password. There are two modes to login. If you use IE browser, please choose activeX mode to login. If you use Firefox or Google chrome, please choose server push…