P-Charge Wallbox Duo Instruction Manual

4, Instruction Manual Updated11/2013 4 | 24 1. Introduction Thank you for choosing a Schletter GmbH product. The P-CHARGE Wallbox Duo was specically designed for the charging of electric vehicles in the private sector. A reliable charging infrastructure for electric vehicles is availa…

12, Instruction Manual Updated11/2013 12 | 24 5. Installation 5.1 REQUIRED INSTALLATION MATERIAL We recommend that you use the following tools to ensure a correct and com- pliant installation of the Wallbox Duo: • Hexagon socket wrench size 4 • Screwdriver with 6-Lobe bit …

10, Instruction Manual Updated11/2013 10 | 24 4.5 COMMUNICATION VIA EWS BOX The communication of the Wallbox Duo with the electric vehicle takes place via the integrated Schletter EWS Box P. The EWS Box P communication module undertakes all control and signaling functions necessary, in acco…

6, Instruction Manual Updated11/2013 6 | 24 2.6 SAFETY INFORMATION DANGER Danger of electric voltage A voltage-free state must be established prior to the start of work at electrical plants and at the P-CHARGE Wallbox Duo in order to avoid accidents resulting from contact with live parts. Please n…

23, P-Charge Wallbox Duo Instruction Manual Updated11/2013 23 | 24 10. Links for support The following linked documentation may provide you with a supplement to the information you have relating to the Wallbox Duo: EWS Box operating instructions: www.schletter.de/EN/download/trac-engineering/ews-box.html P…

19, Instruction Manual Updated11/2013 19 | 24 7.3 OPTIMIZED CHARGING As described in 3.2 / Control elements, you will need connection to a server for this variant. If you have a web-capable computer, you can establish a con- nection between server and EWS-Box via LAN cable. Afterwards…