Domestic 1665 Owner's Manual

47, 45 OVERCASTING WORN EDGES Zigzag stitch along the worn edges, catching the fabric as the needle swings to the left, and allowing the needle to just pass ver the edge of the fabric on the right. Fig. 102 PATCHING Machine baste patch into place under hole or worn area which has been cut away…

49, • ‘ —, d I 4x1 ‘p 0 ‘p 0 - 4-’< 0 0- p, j cL . ‘0 C) CD o CD ‘-4- ‘-4- CD CDCDCD CD CD 4-’ CJ7 CD O. CD -j CL 0 o CD 0 :z G) p, p- CD 0 C1 (jJ ‘-4- :xI _4-0 0 0 - ‘- 4- ’t5 ‘0 CD0-t- r’ CD ‘•:I ‘-3 •I :-i j CD 0 Ci) ‘• 1 -r 0 CD CD cn CD• CD 0CD -4- 0 �…

42, THE ADJUSTABLE CORDING AND ZIPPER FOOT I This attachment is used to make and insert covered cording, and to sew in zippers. Loosen thumb screw to slide foot to either right or left of needle. q CORDING. Fold bias strip of fabric over cord. Loosen thumb screw and set foot so needle is cent…

13, 11 Be sure to set the stitch width at 0, or the needle will break in striking the foot or plate. 1. Set left hand stitch width lock 13 as far left as possible, 2. Move right hand stitch width lock 13 as far left as possible to lock zigzag stitch width control lever 14 in straight stitch positio…

23, BLIND STITCH HEM Use standard zigzag foot. (Fig. 41) Set stitch length control at Number three or four. Set decorative stitch dial at blind hem position Set zigzag stitch width lever to suit material being sewn and hold in place with left lock. The lower the number, the smaller t…