Olivetti XZAC4219-03 PR2 plus Service Manual

139, Olivetti XZAC4219-03 PR2 plus 9-20 XZAC4219-03 • Remove the upper part of the mechanism as explained above. • Back off the 4 screws (2) and remove the tray, taking care not to lose the transmission coupling (3) and the sound-proofing of the tray. Figure 9-20 Note: During reassembly, check correc…

116, 8-12 XZAC4219-03 8.11 ADJUSTMENT OF HORIZONTAL MAGNETIC/MICR DRIVE BELT TENSION MACHINE STATUS: Read/write carriage in reset position (end of stroke motor side). CONDITIONS TO BE CHECKED: Cogged belt (1) tensioned so as to obtain a deflection of 5 mm with a load of 60 g appl…

58, XZAC4219-03 Service Manual 4-5 IBM Menu EMULATION: P.P. II - X 24 Selection of IBM emulation (if) X24 AGM: N – Y Enables/disables the AGM function. PASSBOOK: N - Y Indicates whether the printer is enabled or not to handle passbooks. (if) Passbook Y BINDING: VERTICAL …

106, 8-2 XZAC4219-03 8.1 ADJUSTMENT OF DOCUMENT DRIVE BELT MACHINE STATUS: Not significant. CONDITIONS TO BE CHECKED: Cogged belt (1) tensioned so as to obtain a deflection of 2.9 mm with a force of 200 g applied at the center of the span.. PROCEDURE: Loosen the lock nuts of t…

59, 4-6 XZAC4219-03 (if) ISO SET: OLI-UNIX ISO 8859/1 ISO 8859/2 ISO 8859/5 ISO 8859/6 ISO 8859/7 ISO 8859/8 ISO 8859/9 ISO 8859/15 PC TABLE: TABLE 1 - TABLE 2 Selection of the table of the character generator. CHAR DEFINITION: LQ - DRAFT Selection of print definition. CPI…

149, 9-30 XZAC4219-03 • Back off the six lock-screws (3) of the motherboard. • Back off the two fasteners (4) of the standard serial interface connector. • Back off the two screws (5) of the Centronics interface connector. • Extract the motherboard from the baseplate of the…