MartinLogan MONTAGE Operation & User’s Manual

9, MartinLogan MONTAGE or solid surface, it can shake as it produces sound and, consequently, the sound can be compromised. If your speaker is sitting on the carpet and only foot gliders are used, the bass can be ill defined and even boomy. The use of spikes is recommended to insure secured footing for your speakers…

10, It had long been the practice of stereo buffs to connect their television to a stereo system. The advantage was the use of the larger speakers and more powerful amplifier of the stereo system. Even though the sound was greatly improved, it was still mono and limited by the broadcast s…

6, 6 Placement PLACEMENT By now your speakers should be placed approximately two to three feet from the front wall (the wall in front of the listening position), and at least one to two feet from the side walls. Your sitting distance should be farther than the distance between the speakers th…

12, 12 Frequently Asked Questions and Troubleshooting FREQUENTLY ASKED QUESTIONS AND TROUBLESHOOTING How do I clean my speakers? Just use a dust free cloth or a soft brush to remove the dust from your speakers. We recommend a specialty cloth (available at the Xtatic shop at www.martinlogan.com)…

13, System Frequency Response 47–20,000 Hz ± 3 dB Sensitivity 90 dB/2.83 volts/meter Impedance 5 ohms Crossover Frequency 2500 Hz Components Air core coils, metal film and low dissipation electrolytic capacitors Woofer/Mid-Range Drivers 2 x 6.5” (16.5cm) high rigidity aluminum cones with exten…

4, Congratulations! You have invested in a new world of high-performance audio! The MartinLogan Montage represents the extension of an intensive, dedicated group research program directed toward establishing a world class reference monitor utilizing leading- edge technology, without compromising…