Regency OASIS Owner's Manual

11, Turn on the power and check operation of the fan. The fan is controlled by the use of the pull chain as follows: one pull = high speed two pulls = medium speed three pulls = low speed four pulls = off For proper functions, ensure that the chain is pulled down fully and released each ti…

10, Regency OASIS 9 Switch Housing Hub Side Screw Switch Housing Reverse Switch Connector (plug) with Side Buckle Connector (receptacle) Keyhole Slot Hole for side screw Pull Chain Light Kit (optional) connects to bottom of switch housing INSTALLATION OF REMOVABLE SWITCH HOUSING NOTE: Be sure to turn…

1, •OASIS• • CEILING FAN OWNER’S MANUAL • WARNING: Read and follow these instructions carefully and be mindful of all warnings shown throughout. 5/04 …

3, WARNINGS: * Disconnect power by removing fuse or turning off circuit breaker before installing the fan. To reduce the risk of fire, electrical shock, or personal injury, mount only to the building’s structure. Electrical boxes (unsupported) or joist spanning braces not designed fo…

7, 1. Be sure your hanger bracket is secure. The entire weight of the fan will now be hanging from it. 2. Lift fan body/downrod/ball assembly into hanger bracket opening. NOTE: The tab in hanger bracket opening should fit into slot on ball (Fig. 3). 3. Make wire connections, (refer to section tit…

8, ELECTRICAL CONNECTIONS 7 Fan and light controlled by independent wall switches. Light switch FAN switch RED BLK WH BLUE Wiring Box BLK BLK WH WH WH WH BLUE BLK FAN LIGHT Power Lines 120V Green ground Ground to downrod on mounting bracket Fan controlled by pull chain switch. Light controlle…