VersaLogic Copperhead VL-EBX-41 Reference Manual

15, Configuration and Setup EBX-41 Reference Manual 9 3. Attach Power  Plug the power adapter cable VL-CBR-0808 into connector J18.  Attach the 24-pin motherboard connector of the ATX power supply to the adapter.  Attach the 4-pin 12V CPU connector of the ATX powe…

71, VersaLogic Copperhead VL-EBX-41 Special Registers EBX-41 Reference Manual 65 The 32-bit cascade mode is set in TM4MODE in the Timer Control Register. There are also internal or external clock selections for the timers in this register using the external clocks ICTC3 and ICTC4 signals on the connector at J19. The internal cl…

19, Physical Details EBX-41 Reference Manual 13 Figure 6. Heat Plate Dimensions and Mounting Holes (Not to scale. All dimensions in millimeters.) 3.20 3.20 44.48 56.00 89.00 PEM TSOS-M25-600 4X 2.0mm Drill 2X M2.5 x 0.45mm 2X 30.00 11.00 8.00 33.00 …

18, Physical Details EBX-41 Reference Manual 12 Figure 5. VL-CBR-4004 Dimensions and Mounting Holes (Not to scale. All dimensions in inches.) J1 J2 J3 J4 J6 J7 J8 J9…

58, Interfaces and Connectors EBX-41 Reference Manual 52 SPX Expansion Bus Up to four serial peripheral expansion (SPX) devices can be attached to the Copperhead at connector J28 using the VL-CBR-1401 or VL-CBR-1402 cable. The SPX interface provides the standard serial peripheral interfa…

4, EBX-41 Reference Manual iv Table of Contents Introduction ..................................................................................................................... 1 Description ......................................................................................…