GRAPHTEC CS400 Operation & User’s Manual

62, GRAPHTEC CS400 6 – 6 CS400/300 6. TROUBLESHOOTING PROCEDURES 6.9 Smudges Not Appearing in the Original Document Appear in the Scanned Data Cause Remedy The image scanned has a glossy surface, Documents with a glossy surface should be such as a photograph. scanned by placing them inside the carr…

51, CS400/300 5 – 7 5. DAILY MAINTENANCE 5.6 Calibration Calibrate the scanner if scanning quality is observed to deteriorate, with scanned results such as those described below: The scanned image is distorted Areas of uneven color appear in the scanned image Other unsatisfactory results (…

7, – v – Safety Precautions (Continued) CAUTION Do not install, use, or store the scanner in a loca- tion that does not meet the specified temperature and humidity ranges. • Such location may impair the scanner’s perform- ance and cause the scanner to malfunction or break down. Do not …

42, 4 – 6 CS400/300 4. LOADING A DOCUMENT 4.4 Handling Documents According to their Material and Thickness The following problems may occur, depending on the weight and surface condition of the document being scanned. • The document cannot be loaded. • Scanning of the document stops half way thro…

55, CS400/300 5 – 11 5. DAILY MAINTENANCE (1) Select Color Correction on the Scanner menu. (2) Click the Scan button. (3) The following message is displayed. Insert the color correction sheet in the scanner. Position the color correction sheet so that the red bar in the center of the sheet is center…

18, 2 – 4 CS400/300 2. PREPARATION 2.2 Part Names and Functions Front View Document guides Paper sensor Basket Caster Lock Stand Top cover Control panel Cover sensor Release * The CS300 document guides are the magnetic guides supplied as standard accessories. Top cover Open the top cover to…