RADWAG AS series Operation & User’s Manual

44, - 44 - 04 Language Selecting language version of software menu, available settings Polish or English 05 Backlight Determines whether the backlight of the balance’s graphic display should be enabled or disabled (enabling the backlight option improves data visibilit…

63, - 63 - Fig. 51. Bargraphs – automatic scaling Means of preparing mixtures – in accordance with data set in working mode settings on ingredients and their mass Go to parameter 04 Formulation and enter names and mass of the ingredients in a formulation. Remember the follow…

73, - 73 - 17.2. Non-standard printouts Principles of creating non-standard printout templates: − balance enables creating up to 4 custom printout templates, − each template must have the string of text start and end specified, e.g. Printout no. 1 Start – 1 and Printout no. 1 Stop �…

11, - 11 - P5 RS - 232 01 Interface | * * * * * *0.0 | RS 232 02 Baud rate | * * * * * *0.1 | 4800 03 Parity | * * * * * *0.0 | none 04 Data bits | * * * * * *0.2 | 8 bits 05 Stop bits | * * * * * *0.1 | 1 bit 06 Automatic printout | * * * * * *0.0 |…

43, - 43 - 14. SETTING ACCESSIBILITY OF WORKING MODES This group of parameters enables setting accessibility of working modes, which are available for an operator after pressing the Mode key on balance’s overlay. Fig. 26. Working modes – settings All working modes which …

31, RADWAG AS series - 31 - 04 Date Press RIGHT ARROW KEY to enter parameter 04 Data. As specified in the previous point (03 Time) set current date. On setting required date return to weighing mode as specified in point 5.1.2 of this user manual. Fig. 21. Submenu Date / Time – date …