DFI Infinity NF650I Ultra Operation & User’s Manual

117, 117 3 BIOS Setup Set Supervisor Password If you want to protect your system and setup from unauthorized entry, set a supervisor’s password with the “System” option selected in the Advanced BIOS Features. If you want to protect access to setup only, but not your system, set a su…

33, DFI Infinity NF650I Ultra 33 2 Hardware Installation 7. Now lift the cover. 8. Position the CPU above the socket. The gold mark on the CPU must align with pin 1 of the CPU socket. Important: Handle the CPU by its edges and avoid touching the pins. Cover Pin 1 of the socket Gold mark …

124, 124 4 Supported Software Drivers, Utilities and Software Applications The CD that came with the system board contains drivers, utilities and software applications required to enhance the performance of the system board. Insert the CD into a CD-ROM drive. The autorun screen will appear. If af…

97, 97 3 BIOS Setup PWRON After PWR-Fail Off When power returns after an AC power failure, the system’s power is off. You must press the Power but- ton to power-on the system. On When power returns after an AC power failure, the system will automatically power-on. Former-Sts When power retur…

95, 95 3 BIOS Setup Power On By Button To use the power button to power on the system, set this field to Enabled. KB Power On Password Move the cursor to this field and press <Enter>. Enter your password. You can enter up to 5 characters. Type in exactly the same password to confirm, then …

112, 112 3 BIOS Setup CMOS Reloaded The CMOS Reloaded submenu allows you to save different configu- rations and when needed, allows you to conveniently restore one of these previously saved configurations. Highlight CMOS Reloaded in the main menu then press <Enter>. The screen above l…