Lava Heat Italia LAVA 2G Instruction Manual

16, 15 OPERATION INSTRUCTIONS WARNING： 1. Close the valve of the gas cylinder or the regulator after use. 2. Do not move the heater, or cover it with protective cover after it has been turned off until the temperature has cooled down. Operation Checklist For a safe and pleasurable hea…

7, Hardware Used 2 2. Use a secured step ladder or lean the heater carefully. First, unfasten 3pcs Screw M5X12(DD) surrounding the steel mesh from the steel mesh base. Next, unscrew the 3pcs M8 nuts (HH) and remove the mesh base from the three studs. Place all the parts you removed in a secure l…

12, 11 ASSEMBLY INSTRUCTIONS A dented, rusted or damaged propane cylinder may be hazardous and should be checked by your cylinder supplier. Never use a propane cylinder with a damaged valve connection. The propane cylinder must be constructed and marked in accordance with the specifications …

8, 3 3. You will need to remove at least one of the protective steel guards (E) in order to safely remove the bubble rap material from the boroscilate glass tube located in the center of the unit. Unscrew 1 of the M5x12 screws and 1 of the fixing brackets (GG), then remove the protectiv…

9, 6 6. Re-Install the protective steel guard (E) by hanging it on the upper support slots. Next, secure it with 1of the M5x12 screws and 1 of the fixing brackets (GG). Hardware Used DD GG GG x 3 x 3 x 1 Fixing Bracket PP Philips screwdriver Screw M5 X 12 E 5 5. Now that you have properly and c…

3, Lava Heat Italia LAVA 2G PACKAGE CONTENTS 2 NOITPIRCSED TRAP QUANTITY M Bottom plate 1 N Gas Hose & Regulator Reflector Mesh Top Plate Support 1 O Front Panel P Handle Q Handle Support R Ceramic Fiber 2 2 4 1 A B D E Glass Tube Fixer C Protective Guard F Glass Tube G Con…