Dodge 2015 Viper SRT Operation & User’s Manual

114, Once the engine is started, remove the jumper cables in the reverse sequence: 1. Disconnect the negative (-) jumper cable from the remote negative (-) post of the vehicle with the discharged battery. 2. Disconnect the negative end (-) of the jumper cable from the negative (-) post of the booster …

78, Register (8.4AN) 1. Press the “Apps” button on the bottom of the 8.4-inch touchscreen. 2. If a pop-up message appears, press “Register” or go to the “Favorite Apps” or “All Apps” menu and press “Uconnect® Registration.” 3. Read through the registration instructions. Enter and …

11, Dodge 2015 Viper SRT WARNING! • Always apply the parking brake fully when parked to guard against vehicle move- ment and possible injury or damage. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reaso…

127, Cavity Relay Cartridge Fuse Mini-Fuse Description 33 — 20 Amp Blue — Run Acc relay 34 — — — B+ Jumper 35 — — — Spare 36 — — 10 Amp Red ORC Mod Run 37 — — 15 Amp Blue Cluster, Camera 38 — — 20 Amp Yellow Active Damping Suspension 39 — — 10 Amp Red HV…

26, ELECTRONIC SPEED CONTROL The Electronic Speed Control switches are located on the steering wheel. Cruise ON/OFF • Push the ON/OFF button to activate the Speed Control. NOTE: CRUISE will appear on the instrument cluster to indicate the Speed Control is on. • Push the ON/OFF button…