Eizo DuraVision FDF2305W Operation & User’s Manual

47, 47 Chapter 8 Reference 8-2. Detaching/Attaching Stand Base Detaching procedure The Stand base that was attached during setup can be detached using the following procedures. 1. Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down. 2. Turn th…

27, 27 Chapter 2 Adjusting Screens ● Digital Input (HDMI: video signal) The screen size can be changed with the “Screen Size” function. Setting Function Screen Display Auto The monitor automatically changes the screen size according to the aspect ratio *1 and resolution information from the e…

4, Eizo DuraVision FDF2305W 4 Notice for this monitor Cleaning Attention • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image. • Never use any thinner, benzene, wax, and abrasive cleaner, which may d…

54, 54 Chapter 8 Reference 8-6. Preset Timing The following table shows factory preset analog signal timing: Attention • Display position may be deviated depending on the PC connected, which may require screen adjustment using Setting menu. • If a signal other than those listed in the tabl…

14, 14 Chapter 2 Adjusting Screens 2-2. Setting the Resolution When you connect the monitor to the PC and nd that the resolution is improper, or when you want to change the resolution, follow the procedure below. Windows 8.1 / Windows 8 / Windows 7 1. For Windows 8.1 / Windows 8, click the “…

19, 19 Chapter 2 Adjusting Screens ● To adjust color temperature Color temperature can be adjusted. The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value. The value is expressed in degrees “K” (Kelvin). The screen becom…