ACCO Brands X25C Operation & User’s Manual

13, English 13 Installation Warning Indicator  When the “TEMP” indicator turns red, it indicates the pro- jector has overheated. The projector will automatically shut itself down.  When the “LAMP” indicator turns red, it indicates a prob- lem with the lamp. Turn off the project…

35, English 35 Appendices Problem: Message Reminders 4 Fan fail: 4 Over temperature: 4 Power Off: 4 Replace the lamp: …

18, 18 English User Controls The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to Operate 1. To open the OSD menu, press “Menu” on the Remote Control…

34, 34 English Appendices 4 Make sure the projection screen is between distance 3.9 to 39.4 feet (1.2 to 12.0 meters) from the projector. (See page 15) Problem: The image is stretched when displaying 16:9 DVD The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing …

17, ACCO Brands X25C English 17 User Controls Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 12-13. Re-Sync Automatically synchronizes the projector to the input source. Keystone Adjusts image distortion caused by tilting the projector (±16 degr…

39, English 39 Appendices Please note that damage resulting from incorrect installation will invalidate the war- ranty. Ceiling Mount Installation 1. To prevent damaging your projector, please use the ceiling mount package for installation. 2. If you wish to use a third party…